Coil Nailer runs 0° plastic collated coil nails.
ThomasNet-Tools : 2010-03-09 08:32:40
Weighing 4.5 lb, Model DF225C can hold up to 300 CS or CI Series nails from 1½ to 2½ in. in length, and can consistently drive 2¼ in. x .099 flush into hardie-board. Tool-less 360°...

Electronic Torque Wrenches range from 7.5 lb-in. to 2,000 lb-ft.
ThomasNet-Tools : 2010-03-08 08:33:39
Available in 9 sizes, Dial Electronic Torque Wrenches feature torsional strain gauge technology, which ensures accuracy to ±1% in both directions. Accuracy is valid from 10-100% of full scale. In...

Screw-Holding Screwdriver extends reach into tight spaces.
ThomasNet-Tools : 2010-03-08 08:33:37
Suited for contractors, electricians, and auto mechanics, Professional-Grade Screwdriver features thermoplastic Grip-n-Twist(TM) screw-holding mechanism that runs entire length of 7 in. tempered steel...

Battery Operated Cable Cutter weighs less than 7 ½ lb.
ThomasNet-Tools : 2010-03-05 08:32:26
Equipped with 2 1/8 in. dia blade opening for cutting jacketed underground cables, ES1000 can cleanly cut 1,000 kcMil copper and aluminum cable in less than 8 sec. It features forward/reverse lever an...

Impact Wrench provides max torque of 1,947 lb-in.
ThomasNet-Tools : 2010-03-03 08:31:12
Operating from 18 V Li-Ion battery packs, ½ in. PowerMaster SSW18 features Variospeed electronics with 3 speed ranges from 0-1,600, 0-2,150, and 0-2,650 rpm. Air-cooled charging technology uses g...

Wireless Remote Controlled Spotlight features 50 W HID.
ThomasNet-Tools : 2010-03-02 08:32:29
Equipped with 400 lb grip magnetic base, 16 ft coil detachable cord with cigarette plug, and wireless handheld remote control, RCL360-HID-RF-M produces 4,500 lumens and creates bright, white beam that...

Seamers feature interchangable blades.
ThomasNet-Tools : 2010-03-01 08:31:48
Targeting HVAC/R and building/construction trades, Model MW-S36 comes with 3 and 6 in. wide, 1½ in. deep forged steel blades, rated for up to 22 gauge cold rolled sheet metal, while Model MW-S59 ...

Torque Wrench adjusts 7/8 in. field-attachable connectors.
ThomasNet-Tools : 2010-02-26 08:36:51
Designed for connecting and disconnecting 7/8 in. Series 820 field-attachable cable connectors with hex shaped locking nuts, torque wrench allows operators to tighten hex nuts to correct torque value ...

Cordless No-Hub Coupling Driver can fasten up to 300 clamps on single charge.
ThomasNet-Tools : 2010-02-22 08:31:12
Featuring specific torque settings for 60 and 80 lb-in., Lithium-Ion battery powered M12(TM) cordless no-hub driver model 2455-22 is accurate for up to 25,000 clamps before re-calibration. Auto shut-o...

Wire Stripping Tools work with flexible and solid conductors.
ThomasNet-Tools : 2010-02-19 08:33:25
Stripax® tools are designed to strip PVC insulated wire ranging from 28-8 AWG, while Stripax® 16 cuts wire from 10-6 AWG. Measuring 7½ in. long, both products feature detachable grip pl...